COATING WB HIGH GLOSS

Coating WB High Gloss is a good drying high gloss emulsion.
The dried coating film provides an excellent rub resistance and is suitable for subsequent UV varnishing.
The coating runs on high speed printing presses and is suitable for double side coating applications.

Data sheet:
Security file: Este documento es sólo visible para los clientes. Si ya eres cliente accede al área de clientes. Si aun no eres cliente o tienes problemas para acceder ponte en contacto con nosotros.
Recommended coating weight 4 – 6 grms/m2 (wet).
Suitable for paper (> 125grms) and board.
Adapted for double side applications.
Suitable for conventional 2-roller system and anilox.

Gloss: 8 (1 matt – 10 highest gloss)
UV varnishing: Yes
Drying speed: 4
Slip: 3
Rub resistance: 4
Block resistance: 4
Glueability: 4 (Specific films to be tested)
Heat resistance: 2 (140ºC Face-to-Face)

****** 1 (Slow / Low) – 5 (Fast / High) ******

Viscosity: 45 secs DIN4 @ 20°C ± 5 sec
Specific gravity: 1.04 g/cm3 ± 0.04
Apearance: Opaque liquid
Solids: 40% ± 4%

TYPE

Water base

BRIGHTNESS

8/10

DRYING

4/5

DOUBLE SIDE

Yes

PACKAGING

Yes

REMARKS

For paper and cardboard paper

Instructions for use

Use solvent and alkali resistant inks.
Reduce viscosity with water, if required.
Stir well before use.
Store at temperatures above 5°C and in closed packaging.
Initial wash with plain water or Beca Ink C diluted with water.
Dried coating can be removed using neat Beca Ink C. For cleaning anilox we refer to our special Aniclean Plus.
In unopened, original packaging, 12 months from manufacturing date.

Do you have any question about the product?Do you need expert help?