- Great cleaning capacity. It can be used diluted in water, at various ratios depending on the ink. Maximum recommended dilution 1+15.
- Valid for dry inks and UV varnishes.
- Valid for highly pigmented and fast drying inks.
- Safe for use with all the press components
- It does not swell nor provoke stickiness of the photopolymer surface.
- Adequate for use with hard waters.
- Non aggressive formulation. It does not attack ceramic or steel anilox. Not valid for use with aluminium anilox.
- Low foaming.
- Non VOC.
ANILOX | Recommended |
---|---|
PARTS | Recommended |
CLICHÉS | Recommended |
INKING SET | Recommended |
MANUAL CLEANING | Recommended |
AUTOMATIC CLEANING | Recommended |
UV INK | No |
WB INK | Yes |
SB INK | No |
DILUTION | Up 1:20 pure |
PACKAGING | Yes |
Instructions for use
Photopolymer plates cleaning. Maximum dilution 1+15.- Manually: Apply Beca Ink C on the plate surface, either with a sponge or with a spray. Leave it to act for a few seconds and rinse it off with water.
- Automatically, via a plate washing machine: Use it diluted in water as required.