URAPRESS PLUS T

Excellent fountain solution specifically developed for newspaper presses. It performs well in all types of coldset presses and dampening systems: brush, spray and turbo.

It meets the requirements of the main press manufacturers and it is Fogra approved.

  • Corrosion inhibition approved for all Heidelberg, Man Roland, KBA and WIFAG presses.
  • Not harmful for plastic parts as demanded by the main press manufacturers.
  • Non VOC.
  • Cost efficient recommended fountain mix working dosage.
  • Suitable for soft and medium water hardness.
  • Strongly buffered to keep the pH within the suitable range 4.8-5.0.
  • Excellent surfactant system to provide improved wetting and further even water distribution.
  • Fast start-ups, low and stable water settings.
  • Fast and stable ink water balance.
  • Wide dampening latitude.
  • Minimize the build-up of paper dust and ink on blankets.
  • Excellent biocide system to prevent growth of mould and fungus in the fount circulation system.
  • Avoids blockage of pipes and sprays.
CONVENTIONAL INK

Yes

UV / UV-LED INK

No

FOGRA HOMOLOGATION

Yes

PACKAGING

No

DOSE

2-3%

% IPA

0%

REMARK

Coldset fount for all dampening systems, turbo systems included.

Instructions for use

We recommend cleaning the dampening system before using the fountain solution.

The recommended standard dosage is 2.5 % (vol/vol), resulting in a pH value of 4.8-4.9, depending on the hardness of the water.

For every 1% of concentrate added the conductivity increase will be approximately 450 – 500 μS/cm.

¿Tienes dudas sobre un producto?¿Necesitas ayuda experta?