BECA INK M
A water base ink, general purpose cleaning agent, for photopolymer plates, for the printing press maintenance use and other printroom equipment with ink stains to be cleaned.
- Great cleaning capacity. It can be used diluted in water, at various ratios depending on the ink. Maximum recommended dilution 1+15.
- Valid for dry inks and UV varnishes.
- Valid for highly pigmented and fast drying inks.
- Safe for use with all the press components
- It does not swell nor provoke stickiness of the photopolymer surface.
- Adequate for use with hard waters.
- Non aggressive formulation. It does not attack ceramic or steel anilox. Not valid for use with aluminium anilox.
- Low foaming.
- Non VOC.
| ANILOX | Recommended |
|---|---|
| PARTS | Recommended |
| CLICHÉS | Recommended |
| INKING SET | Recommended |
| MANUAL CLEANING | Recommended |
| AUTOMATIC CLEANING | Recommended |
| UV INK | No |
| WB INK | Yes |
| SB INK | No |
| DILUTION | Up 1:10 pure |
| PACKAGING | Yes |
Instructions for use
Photopolymer plates cleaning. Maximum dilution 1+15.
- Manually: Apply Beca Ink C on the plate surface, either with a sponge or with a spray. Leave it to act for a few seconds and rinse it off with water.
- Automatically, via a plate washing machine: Use it diluted in water as required.
Colour changes / anilox cylinders and press components cleaning.
Empty-out the ink circulation system, replace the ink with Beca Ink C and recirculate it with the press in motion, at least for 5 minutes. After, rinse it off with plenty water via the same ink circulation system.
Other applications:
For UV varnishes and dry ink stains cleaning use it neat.
Alternatively it can also be used to clean miscellaneous surfaces, such as floors, frameworks, etc., as well as to clean starch based adhesives used in the corrugated carton units.