AQUAHEAT 3000

Aditivo de mojado para rotativas heatset, especialmente diseñado para la eliminación total del alcohol isopropílico.

Se trata de una formulación muy estable, cuidadosamente formulada para los talleres más exigentes.

  • Fountain Dosage between 2-4 %.
  • Without IPA.
  • Eliminates alcohol.
  • No VOC.
  • Suitable for soft and medium water hardness.
  • Strong buffered to keep the pH within the suitable range 4.6-5.0.
  • Excellent surfactant system to provide improved wetting and further even water distribution.
  • Specially formulated fount solution to meet the exacting demands of modern high speed Heatset Web Offset Presses.
  • Fast start-ups.
  • Low and stable water settings.
  • Fast and stable ink water balance.
  • Wide dampening latitude.
  • Minimize the build-up of paper dust and ink on blankets.
  • Excellent biocide system to prevent growth of mould and fungus in the circulation system.
  • Avoid blockage of pipes and sprays.
  • Packaged in drums of 200 kg and containers of 1000 Kg.
CONVENTIONAL INK

Yes

UV / UV-LED INK

No

FROGA HOMOLOGATION

Yes

PACKAGING

No

DOSE

3-4%

% IPA

0%

REMARK

Aditivo heatset de uso general

Instructions for use

We recommend clean the dampening system before use the fountain solution.
The recommended standard addition is 2-4 % (vol/vol), resulting in a pH value of 4.6-4.9, depending on the hardness of the water. The recommended dosage can be varied between 2% and 4% depending on the tap water quality.
For every 1% of concentrate added the conductivity increase will be approximately 600 μS/cm.

¿Tienes dudas sobre un producto?¿Necesitas ayuda experta?