- Very stable on press.
- Counteract the calcium problem, avoiding the build-up in ink rollers.
- Suitable for conventional, low migration inks such as MGA, metallic and UV inks.
- Buffered at pH 4.7-5.0 depending on water quality.
- No problems associated with CTP plates attacks. Longer run lengths.
- Extend plate life.
- Excellent desensitising properties.
- Very fast start-ups and restarts.
- Low and stable water settings.
- Fast and stable ink water balance.
- Minimize the build-up in blankets and impression cylinder.
- Allows the reduction of IPA up to 50%. In Komori presses can run without alcohol.
- Reduced ink build-up in dampening rollers.
- Prevent growth of mould and fungus in the circulation system.
- Packaged in cans of 23 kg, drums of 230 kg and containers of 1150 Kg.
- No VOC.
| CONVENTIONAL INK | Si |
|---|---|
| UV / UV-LED INK | Si |
| FROGA HOMOLOGATION | No |
| PACKAGING | No |
| DOSE | 2-3% |
| % IPA | 0-10% |
| REMARK | Sheetfed fount. It helps minimizing cal problems |
Instructions for use
We recommend cleaning the dampening system before using the fountain solution. For every 1% concentrate addition the conductivity increase will be approximately 425 - 450 μS/cm. The final conductivity for a 2,5% fountain solution without IPA will be approximately of 1250 mS/cm. The addition of IPA will decrease the conductivity The recommended standard dosage is 2.5% and 5% of alcohol. Due to the nature of the product, the color of the product can vary depending on the storage conditions. This is a normal situation and do not affect the performance and quality of the product.