AQUAHEAT 3000

Clear
  • Fountain Dosage between 2-4 %.
  • Without IPA.
  • Eliminates alcohol.
  • No VOC.
  • Suitable for soft and medium water hardness.
  • Strong buffered to keep the pH within the suitable range 4.6-5.0.
  • Excellent surfactant system to provide improved wetting and further even water distribution.
  • Specially formulated fount solution to meet the exacting demands of modern high speed Heatset Web Offset Presses.
  • Fast start-ups.
  • Low and stable water settings.
  • Fast and stable ink water balance.
  • Wide dampening latitude.
  • Minimize the build-up of paper dust and ink on blankets.
  • Excellent biocide system to prevent growth of mould and fungus in the circulation system.
  • Avoid blockage of pipes and sprays.
  • Packaged in drums of 200 kg and containers of 1000 Kg.
CONVENTIONAL INK

Si

UV / UV-LED INK

No

FROGA HOMOLOGATION

Si

PACKAGING

No

DOSE

3-4%

% IPA

0%

REMARK

Aditivo heatset de uso general

Instructions for use

We recommend clean the dampening system before use the fountain solution. The recommended standard addition is 2-4 % (vol/vol), resulting in a pH value of 4.6-4.9, depending on the hardness of the water. The recommended dosage can be varied between 2% and 4% depending on the tap water quality. For every 1% of concentrate added the conductivity increase will be approximately 600 μS/cm.

Do you have any question about the product?¿Do you need expert help?