SOLFLEXO 60

Compensated mixture of solvents for a quality engraving of any solvent base photopolymer plate.

Dieses Produkt ist derzeit nicht vorrätig und nicht verfügbar.

  • This solvent does not contain any chlorinated hydrocarbon.
  • Works with any kind of solvent-based photopolymer plate brand.
  • Optimum working temperature: 30ºC ± 2.
  • Short processing time.
  • Flash point > 62ºC. No ADR.
  • Recommended drying time, 1-3 hours at 60ºC, it depends of thickness plate (not to exceed 65ºC).
  • Works with any processing unit, as well for closed and recirculation units.
  • Used product is easily distillate with conventional vacuum distillation equipment.
  • Solflexo 60 has a low odour.
  • When is used properly, it presents a minimal risk to human health and the environment.
FP

60 ºC

POTENCIA

Very high

ADR

No

OLOR

Moderate

Envases disponibles

200L, 1000L

Instructions for use

It is recommended to do preliminary etching tests:

  • Type of photopolymer.
  • Process temperature.
  • Processing time.
  • Brush pressure.

The regeneration recommended for the washing out solution is approx. 10 a 15 liters per square meter and mm of thick of the plate.

Hast du Fragen zu einem Produkt? Benötigst du fachkundige Hilfe?